Review:
Symeo GmbH / Dipl.-Ing. (FH) Daniel Evers

Great product. Our company develops complex radar sensors and systems. Conveying how they work and their advantages to the customer is difficult without specialized knowledge. The task three years ago was to build a demonstration model for our trade shows that is both self-explanatory and impressive to our customers.

With Glaser Engineering Office we found a company that impressed us from the very first second. Johannes Glaser listened to us very carefully and understood precisely what we wanted and needed. Due to the extensive equipment of his machine shop, he was able to incorporate additional innovative ideas and possibilities, so that in the end the finished radar demonstrator clearly exceeded our expectations.

What we particularly appreciate is the perfect adherence to time and cost. The quality manufacturing with the corresponding finish. The comprehensive and farsighted planning as an overall project. Among other things, Mr. Glaser also thought through the transport logistics very carefully. After 3 years we now also have long-term experience from a total of more than 7 trade shows where the demonstration model was used. It was also important to us that Glaser Engineering Office provided comprehensive service and interchangeability of parts so that the trade show model still looks like the first day.

In the meantime we have the second trade show demonstrator in continuous use for a very important new product and the third is in planning.

According to our calculations the demonstration model has already paid for itself after 2–3 trade shows. We receive very positive feedback from customers and other exhibitors, and we were able to increase our lead success significantly in the double-digit percentage range, among other things thanks to Mr. Glaser's trade show models. We also use the trade show exhibits permanently in our office for customer meetings outside of trade show operations, i.e. 365 days a year.

There is only one reason not to recommend Glaser Engineering Office: because then he might eventually have no time left for our new projects!

This year we wanted to show something special at our trade show booth.

When searching for an exhibitor builder for extraordinary exhibits, I came across engineer Glaser. Already one day after my inquiry the first online meeting took place. Johannes immediately understood our concern and worked out a trade-show-ready concept overnight that brings the technical aspects to the point and unites them with aesthetic design. A real eye-catcher with glowing clouds of fluorescent granulate under UV light. Brilliant! Already one meeting later we were able to view the 3D model virtually in our office via AR. The entire Hygienic-Seal team of Freudenberg Sealing Technologies was enthusiastic.

During the entire project phase Johannes kept us updated via a website with pictures, videos and greetings from the workshop. Almost as if we were there live. Spontaneous phone calls and short-notice meetings were always possible. We were particularly pleased about the personal visit to the trade show booth after project completion. The reliable and trusting cooperation with Johannes contributed significantly to the success of our project.

Johannes combines creativity, design and technical know-how in one person. From planning to manufacturing to the practical transport case, he implemented everything with great commitment and much attention to detail. Thank you for the great project and the extremely professional cooperation!

The Hygienic Seal demonstrator was a complete success at drinktec in Munich. Interest was very high and many visitors wanted to know who had built the demonstrator. Of course we enthusiastically recommended him.

Under no circumstances do we want or may we fail to present our statement / our review for Johannes Glaser, electrical engineer in Nordheim.

On our depressing search for a programmer for an unmanned industrial truck, the fortunate contact with Johannes Glaser at the end of 2021 was decisive for the project. Moreover, from today's perspective, the maximum top gain for us and this project. In the past we have - and wanted to - generally not write reviews. However, this indeed almost breathtaking reliability and competence of Johannes within electronics and programming has now made it necessary to make our findings from working with him available to anyone who wants to read them. For us at least, Johannes is today the yardstick in electrical engineering and programming. None of his predecessors could juggle so precisely - almost virtuoso - with controllers as hardware and his programs written in C++ as software. This is, as mentioned, indeed "breathtaking" for us. And — this must be explicitly mentioned — not only in theoretical talk and proposing possible solutions (there are countless companies and freelancers available on the market for that); but factually, actually and consistently with the identical, physical delivery of his proposed solutions on an electronic board, which then also work without complaint at first request. And then even at top speed. For that we can and must, borne of deep conviction, bow and take off our hats "Chapeau" my dear Johannes "Chapeau". It may be that this, our statement, may seem overheated; but any reader within their own project, where they are stuck, can check the truthfulness of what we have stated with Johannes. We are sure he will not disappoint.

With the hope of being able to keep you in our ranks permanently.

As part of a development project, we met Mr. Glaser via an online search for a suitable developer for a demanding microelectronic circuit. From the first contact through several meetings to the completion of the circuit board in industrial quality we were excellently supported. His dynamic, open and fresh manner fit well with our project team and was very conducive to creative solution approaches.

Mr. Glaser's office response times were extraordinarily fast, the processing effective and the result excellent. The online meetings were professionally organized and conducted with all possibilities of modern visualization technology. Thus, despite the Corona pandemic, we were always very well informed about the current development status. Queries and short-term change requests were handled very competently, quickly and accommodatingly.

With Mr. Glaser we succeeded, despite procurement problems in the electrical supply chains, in completing an ambitious prototype development economically efficiently and successfully within a tight timeframe. Mr. Glaser embodies the young, innovative and flexible generation of specialist firms, of which there are unfortunately too few on the market. We clearly give our recommendation for Mr. Glaser.

On behalf of SUCABO GbR I would like to sincerely thank you for the work done. Mr. Glaser was and is acting as a consultant in our project 'Development of a sensor board' and he distinguished himself greatly by his competent knowledge and his structured way of working. Always friendly and helpful. It was a pleasure for me to work with him on a project! Further joint projects will follow.

As project and deputy department head, I would like to highlight Engineer Glaser's outstanding performance on behalf of the Fraunhofer Institute for Computer Graphics Research with this review. In the course of the research project ROBBE - robot-assisted processing of assemblies during the dismantling of nuclear power plants - Mr. Glaser, as an external development engineer, made an important contribution to the project's success.

The task was to develop a mobile sensor box with Wi-Fi and an inertial measurement unit (IMU). What at first seemed like a manageable project quickly turned out to be a complex task: To achieve highest precision in recording orientation in 3D space, demanding mathematical algorithms such as singular value decomposition and Kalman filters had to be implemented in the C++ programming language on a microcontroller. Therefore it was all the more impressive that Mr. Glaser presented a high-performance sensor box before the agreed delivery date. In a very short time he not only refined the original concept, programmed the software and developed the electronics, but also manufactured the hardware, including 3D printing and CNC-milled parts.

The outstanding quality of the delivered software and hardware as well as the comprehensive documentation, as well as the well-founded presentation of the development steps and use of professional measuring technology, exceeded our expectations. Many thanks and respect for the excellent work and great collaboration.

Since 2016 Mr. Glaser has been developing professional software solutions for our company, the wero group. From the beginning I was impressed by his grasp and structured approach. He immediately understood what was important to me; created a concept from my ideas and implemented it in no time. Our collaboration is characterized by the fact that I can express my wishes and shortly after I am thrilled with the results. What Mr. Glaser programs with foresight runs stably, reliably and is very user-friendly. A good example of this is our Doc-Manager software, which is now used by over 100 of our customers for audit-proof document management. The software has been running smoothly on a total four-digit number of end devices for years. Our customers can contact Mr. Glaser directly, who implements their specifications immediately. This way the software is continuously optimized according to customer wishes and grows with us.

In this review I particularly want to highlight communication with Mr. Glaser. He is very accessible and responsive, straightforward, asks the right questions and exceeds expectations. From an economic point of view, cooperation with Mr. Glaser is also an excellent investment that has paid off several times by now.

I would recommend him as a 'hidden gem' because he masters his field in a virtuosic way and is unique in his precision and speed.